WALTER TAPS INTO SOLID CARBIDE FOR SUPERB THREADING OF HARDENED STEELS

Tooling expert Walter GB has announced a range of two new solid carbide taps and a thread milling cutter targeted specifically at producing threads in hardened steel.

TC388 Supreme and TC389 Supreme solid carbide taps are for 50–58 HRC and 55–65 HRC materials, respectively, while the TC685 Supreme thread mill is for workpieces up to 44 HRC hardness levels.

The TC388 and TC389 Supreme taps have special cutting geometries that fully shear off the root of the chip when reversing, minimising torque peaks that are common with blind hole machining; for example, when the reversing of the tap can result in fractures.

In addition, the new geometries also prolong the tool life and increase process reliability, and the need for oil lubrication has been replaced by the use of emulsion.

Generating maximum process reliability and long tool life, the TC685 Supreme orbital drill thread mill produces the core hole and thread (and chamfer, if required) in a single operation.

Its face milling geometry produces stabilising forces in the axial direction to improve stability and reduce deflection – with the result of fewer radius corrections and reduced wear. In addition, its 15° helix angle and internal coolant guarantee chip evacuation.

Automation Update